Max Door Width:-  1400mm
Max Door Weight:-  120Kg
Strength Size:-  2 - 6
Adjustable Closing Action:-  Yes
Adjustable Latch Action:-  Yes
Delayed Action:-  Yes
Backcheck:-  Yes
Applications:-  Fig 1, Fig 61 & Fig 66
Handed:-  Reversible
Finish:-  Silver
Fire Tested:-  Yes, 2 hours

FEATURES
Concealed adjustment to prevent unautorised adjustment to closer
10 year Guarantee
BS EN 1154 Compliant

Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.

Length	Width	Depth
310mm	55mm	66mm

DOOR CONTROLS

A door closer is an important link in the control of fire and smoke and could also save lives.  The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer.  This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?

This standard classifies door closing devices using a 6 digit coding system.  Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113

Digit 1:- Category of use

Identifies the angle of opening.  Grade 4 means the closer will close the door from 180 degree aprox.  Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles

Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size

Each number in this category identifies the closer size and its suitability for use on these doors.  Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior

Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use

A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance

Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.

Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.

Max Door Width:-  930mm
Max Door Weight:-  60Kg
Strength Size:-  3
Adjustable Closing Action:-  Yes
Adjustable Latch Action:-  Yes
Delayed Action:-  No
Backcheck:-  No
Applications:-  Fig 1 & Fig 61
Handed:-  Reversible
Finish:-  Silver
Fire Tested:-  Yes

FEATURES
Single action electro - magnetically controlled closing device.
On site choise of ''Hold open'' or ''Free swing'' functions.
Ideal for use in areas used by the elderly or infirmed

Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.

Length	Width	Depth
305mm	64mm	92mm

DOOR CONTROLS

A door closer is an important link in the control of fire and smoke and could also save lives.  The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer.  This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?

This standard classifies door closing devices using a 6 digit coding system.  Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113

Digit 1:- Category of use

Identifies the angle of opening.  Grade 4 means the closer will close the door from 180 degree aprox.  Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles

Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size

Each number in this category identifies the closer size and its suitability for use on these doors.  Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior

Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use

A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance

Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.

Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.

Max Door Width:-  1100mm
Max Door Weight:-  80Kg
Strength Size:-  4
Adjustable Closing Action:-  Yes
Adjustable Latch Action:-  Yes
Delayed Action:-  No
Backcheck:-  No
Applications:-  Fig 1 & Fig 61 & Fig 66
Handed:-  Reversible
Finish:-  Silver or Polished Brass
Fire Tested:-  Yes to 2 Hours

FEATURES
Concealed adjustment to prevent unauthorised adjustment to closer.
2004E Fire Tested to 2 Hours.
EN1154 Compliant.
10 Year Guarantee.

Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.


Dimensions

Length	Width	Depth
249mm	48mm	59mm

DOOR CONTROLS

A door closer is an important link in the control of fire and smoke and could also save lives.  The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer.  This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?

This standard classifies door closing devices using a 6 digit coding system.  Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113

Digit 1:- Category of use

Identifies the angle of opening.  Grade 4 means the closer will close the door from 180 degree aprox.  Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles

Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size

Each number in this category identifies the closer size and its suitability for use on these doors.  Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior

Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use

A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance

Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.

Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.

Max Door Width:-  1100mm
Max Door Weight:-  80Kg
Strength Size:-  2 - 4
Adjustable Closing Action:-  Yes
Adjustable Latch Action:-  Yes
Delayed Action:-  No
Backcheck:-  Yes
Applications:-  Fig 30
Handed:-  Reversible
Finish:-  Silver
Fire Tested:-  Yes, 2 hours

FEATURES
Concealed adjustment to prevent unautorised adjustment to closer
10 year Guarantee
BS EN 1154 Compliant

Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.

Dimensions

Length	Width	Depth
310mm	55mm	66mm

DOOR CONTROLS

A door closer is an important link in the control of fire and smoke and could also save lives.  The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer.  This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?

This standard classifies door closing devices using a 6 digit coding system.  Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113

Digit 1:- Category of use

Identifies the angle of opening.  Grade 4 means the closer will close the door from 180 degree aprox.  Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles

Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size

Each number in this category identifies the closer size and its suitability for use on these doors.  Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior

Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use

A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance

Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.

Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.

Max Door Width:-  1400mm
Max Door Weight:-  120Kg
Strength Size:-  2 - 6
Adjustable Closing Action:-  Yes
Adjustable Latch Action:-  Yes
Delayed Action:-  No
Backcheck:-  Yes
Applications:-  Fig 1, Fig 61 & Fig 66
Handed:-  Reversible
Finish:-  Silver or Brass
Fire Tested:-  Yes, 2 hours

FEATURES
Concealed adjustment to prevent unautorised adjustment to closer
10 year Guarantee
BS EN 1154 Compliant

Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.

Length	Width	Depth
310mm	55mm	66mm

DOOR CONTROLS

A door closer is an important link in the control of fire and smoke and could also save lives.  The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer.  This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?

This standard classifies door closing devices using a 6 digit coding system.  Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113

Digit 1:- Category of use

Identifies the angle of opening.  Grade 4 means the closer will close the door from 180 degree aprox.  Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles

Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size

Each number in this category identifies the closer size and its suitability for use on these doors.  Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior

Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use

A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance

Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.

Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.

Max Door Width:-  830mm
Max Door Weight:-  45Kg
Strength Size:-  3
Adjustable Closing Action:-  Yes
Adjustable Latch Action:-  Yes
Delayed Action:-  No
Backcheck:-  No
Applications:-  Fig 66
Handed:-  Reversible
Finish:-  Silver
Fire Tested:-  Yes

FEATURES
Single action electro - magnetically controlled closing device.
On site choise of ''Hold open'' or ''Free swing'' functions.
Ideal for use in areas used by the elderly or infirmed

Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.

Length	Width	Depth
305mm	64mm	92mm

DOOR CONTROLS

A door closer is an important link in the control of fire and smoke and could also save lives.  The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer.  This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?

This standard classifies door closing devices using a 6 digit coding system.  Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113

Digit 1:- Category of use

Identifies the angle of opening.  Grade 4 means the closer will close the door from 180 degree aprox.  Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles

Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size

Each number in this category identifies the closer size and its suitability for use on these doors.  Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior

Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use

A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance

Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.

Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.

Max Door Width: 1300mm
Max Door Height: Not applicable
BS EN Operation: EN179
Finish: Silver
Handed: Supplied left or right but reversible on site

Features
Pad operated rim catch
Suitable for use on single doors and for the first opening leaf of double rebated door applications
Can be used with a rim cylinder fitted yo the outside of the door
Suitable left or right hand, but reversible on site
Includes fixing pack for timber and metal door sets

 

Can't find what you require? Call us on 01443 433888

Max Door Width:-  950mm
Max Door Weight:-  60Kg
Strength Size:-  3
Adjustable Closing Action:-  Yes
Adjustable Latch Action:-  Yes
Delayed Action:-  No
Backcheck:-  No
Applications:-  Fig 1 & Fig 61 & Fig 66
Handed:-  Reversible
Finish:-  Silver or Polished Brass
Fire Tested:-  Yes to 1 Hour

FEATURES
Concealed adjustment to prevent unauthorised adjustment to closer.
2003E Fire Tested to 1 Hour.
EN1154 Compliant.
Certified approved CF111
10 Year Guarantee.

Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.


Dimentions

Length	Width	Depth
249mm	48mm	59mm

DOOR CONTROLS

A door closer is an important link in the control of fire and smoke and could also save lives.  The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer.  This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?

This standard classifies door closing devices using a 6 digit coding system.  Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113

Digit 1:- Category of use

Identifies the angle of opening.  Grade 4 means the closer will close the door from 180 degree aprox.  Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles

Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size

Each number in this category identifies the closer size and its suitability for use on these doors.  Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior

Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use

A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance

Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.

Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.

Max Door Width: 1300mm
Max Door Height: Not applicable
BS EN Operation: EN1125
Finish: Silver
Handed: Supplied left or right but reversible on site

Features
For use on single doors or first opening leaf of a pair of doors
With rebated meeting styles, where a vertical bolt is fitted to the other leaf
Supplied left or right handed, but can be reversed on site
Double door strike is required for double door applications

 

Can't find what you require? Call us on 01443 433888

Max Door Width: 1300mm
Max Door Height: 2500mm
BS EN Operation: EN1125
Finish: Silver
Handed: Left or right, reversible on site

Features
Set contains Briton 378Erim panic latch for first opening leaf
Briton 376E single panic bolt for second opening leaf
Double door strike to secure rim panic latch
Supplied left or right handed, but can be reversed on site

 

Can't find what you require? Call us on 01443 433888

Max Door Width:-  850mm
Max Door Weight:-  40Kg
Strength Size:-  2
Adjustable Closing Action:-  Yes
Adjustable Latch Action:-  Yes
Delayed Action:-  No
Backcheck:-  No
Applications:-  Fig 1 & Fig 61 & Fig 66
Handed:-  Reversible
Finish:-  Silver
Fire Tested:-  N/A

FEATURES
Concealed adjustment to prevent unauthorised adjustment to closer.
EN1154 Compliant.
10 Year Guarantee.

Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.

Dimensions

Length	Width	Depth
249mm	48mm	59mm

DOOR CONTROLS

A door closer is an important link in the control of fire and smoke and could also save lives.  The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer.  This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?

This standard classifies door closing devices using a 6 digit coding system.  Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113

Digit 1:- Category of use

Identifies the angle of opening.  Grade 4 means the closer will close the door from 180 degree aprox.  Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles

Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size

Each number in this category identifies the closer size and its suitability for use on these doors.  Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior

Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use

A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance

Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.

Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.

Max Door Width: 1300mm
Max Door Height: 2500mm
BS EN Operation: EN1125
Finish: Silver
Handed: Reversible

Features
Anti-thrust device and automatic top catch to release bolt into secure position when door is closed
Self handing for use on single and double door applications

 

Can't find what you require? Call us on 01443 433888

Max Door Width:-  1400mm
Max Door Weight:-  120Kg
Strength Size:-  2 - 6
Adjustable Closing Action:-  Yes
Adjustable Latch Action:-  Yes
Delayed Action:-  Yes
Backcheck:-  Yes
Applications:-  Fig 1, Fig 61 & Fig 66
Handed:-  Reversible
Finish:-  Silver
Fire Tested:-  Yes, 2 hours

FEATURES
Concealed adjustment to prevent unautorised adjustment to closer
10 year Guarantee
BS EN 1154 Compliant

Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.

Length	Width	Depth
318mm	74mm	62mm

DOOR CONTROLS

A door closer is an important link in the control of fire and smoke and could also save lives.  The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer.  This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?

This standard classifies door closing devices using a 6 digit coding system.  Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113

Digit 1:- Category of use

Identifies the angle of opening.  Grade 4 means the closer will close the door from 180 degree aprox.  Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles

Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size

Each number in this category identifies the closer size and its suitability for use on these doors.  Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior

Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use

A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance

Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.

Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.

Max Door Width: 1300mm
Max Door Height: Not applicable
BS EN Operation: EN1125
Finish: Silver
Handed: Supplied right handed but reversible on site

Features
Additional security without affecting safety
Panic operator supplied with mortice night latch
Supplied right handed but can be reversed on site
Anti-thrust device and dual profile lockcase accepts both euro and oval profile cylinders (cylinder not supplied)

 

Can't find what you require? Call us on 01443 433888