We are able to provide a key cutting service for the Mul-T-Lock Garrison range.

For Mul-T-Lock Garrison keys we will have to be provided with the 7 digit code shown on the key card.

This number we need is positioned as  shown in the photograph. It is the number near the centre of the card up from lower edge of the card. Ignore the numbers near the top edge of the card.
We have the dedicated specialised machinery to cut keys for the Garrison range. Each key is cut as an original, not a copy from another key. Just let us know the key code and we will cut any quantity you require. Please enter the 7 digit code in the special instructions box during the checkout process.

 Because of the security issues involved we dispatch keys securely by Royal Mail Special Delivery or Carrier.

Keys ordered before 3.00pm will be dispatched the same da 

Can't find what you require? Call us on 01443 433888

Mechanism:  Euro Cylinder
Case Size:  63mm or 75mm
Follower:  8mm
Forend Finish:  Brass
Handing:  Reversible

Features
Pierced to accept bolt through furniture
Suitable for use with unsprung handles
Dead bolt has anti-saw protection

Operation
Deadbolt is locked or unlocked by euro profile single cylinder, double cylinder or thumb turn cylinder.
Reversible latch bolt withdrawn by either lever handles or euro cylinder.

Case Depth	63mm	75mm
Backset	45mm	57mm
Case Height	108mm	108mm
Centres	48mm	48mm
Forend Length	165mm	165mm
Forend Width	25mm	25mm

 

Can't find what you require? Call us on 01443 433888

We are able to provide a keying alike service for all cylinders and padlocks in the Mul-T-Lock Garrison range.This can be done for any number of cylinders so that one key will fit all the doors and padlocks in your house. Say goodbye to large bunches of keys in your pocket or handbag!

Keying alike can be done on the Break Secure Euro Cylinder, padlocks, rim cylinders & mortise (screw-in) cylinders. See pages on individual products for information regarding them.

Keyed  alike cylinders are supplied with 4 keys per set of cylinders/padlocks. Any additional keys must be ordered separately via our Garrison Key Cutting Service.

Keyed alike products are not available for purchase as single items. The only exception to this is when a single cylinder is being added to an existing keyed alike system. The key code for that system must be placed in the "special instructions" box during the checkout process.

Useful Information - How to Measure a Euro Cylinder

Can't find what you require? Call us on 01443 433888

 

Available in grey only

Features
Available in 40mm or 60mm backset
Deadlocked by key from outside
Complete with fittings and instructions

Operation

Latchbolt is withdrawn from by handle from inside and by key from outside. Bolt and handle can be deadlocked by key from outside or by slide button inside. Slide button also operates latch holdback facility.

This item is sold without a cylinder, for Mul-T-Lock Rim Cylinders please see our rim cylinder selection.

Can't find what you require? Call us on 01443 433888

The Garrison cylinder uses a 7 pin tumbler locking mechanism,is torsion resistant, pick resistant & corrosion resistant.

Each individual differ is provided with a ''security key cutting card''. This card contains information to enable our dedicated to machinery to cut each key as an original, rather than making a copy from a possibly very worn key. It is very difficult to copy a Garrison key without this card and the dedicated machinery.

As Garrison is a 7 pin system it allows for over 800,000 different keys. Far greater than the 20,000 offered by other high quality standard cylinders. They are available in a polished brass or nickel matt finish. 

The dimpled key is double sided so you do not have to worry about putting the key in the correct way up.

Extra Keys Available with order please go to Mul-T-Lock Garrison Key Cutting Service. 

Useful Information - How to Measure a Euro Cylinder

 
Can't find what you require? Call us on 01443 433888

We are able to provide a key cutting service for the Mul-T-Lock Integrator range.

For Mul-T-Lock Integrator keys we will have to be provided with the 7 digit code shown on the key card. We regret we are unable to cut these keys if the code is unavailable

The number we need is positioned as  shown in the photograph. It is the number near lower right hand side of the card. Ignore the numbers near the top edge of the card, and on the lower left hand side
We have the dedicated specialised machinery to cut keys for the Integrator range. Each key is cut as an original, not a copy from another key. Just let us know the key code and we will cut any quantity you require. Please enter the 7 digit code in the special instructions box during the checkout process.

We only use genuine Mul-T-Lock key blanks.

Quantity discounts available for 10 or more. Please contact us for further details.

Because of the security issues involved we dispatch keys securely by Royal Mail Special Delivery or Carrier.

Please contact us for further details

Can't find what you require? Call us on 01443 433888

These cylinders are suitable for any application where a lock is needed on only one side of a door. For example. an up and over garage door.

These cylinders can be keyed alike with any other cylinder / padlock in the Garrison range. If you wish to purchase cylinders in keyed alike form, so that one key fits all locks please go to our Mul-T-Lock Garrison Keyed Alike Products. 

 

Can't find what you require? Call us on 01443 433888

This range of padlock is available in two sizes, 8mm & 10mm diameter Boron hardened shackle. Supplied with 2 keys.

Features
Exceeds CEN Level 3
Ball Bearing locking mechanism
Anti corrosive in all weather conditions
Brass body with satin chrome coating
Key Retaining

Can Be keyed alike or master keyed with other locks in the Garrison range (even the lock on your house, gates or garage).There is no need for a huge bunch of keys any longer. Beef up ypur security and improve your convenience at the same time!  If you wish to purchase locks in keyed alike form, so that one key fits all locks please go to our Mul-T-Lock Garrison Keyed Alike Products.

The Garrison cylinder uses a 7 pin tumbler locking mechanism,is torsion resistant, pick resistant & corrosion resistant. 
Each individual differ is provided with a "security key cutting card". This card contains information to enable our dedicated to machinery to cut each key as an original, rather than making a copy from a possibly very worn key. It is very difficult to copy a Garrison key without this card and the dedicated machinery. 
As Garrison is a 7 pin system it allows for over 800,000 different keys. Far greater than the 20,000 offered by other high quality standard cylinders.

The dimpled key is double sided so you do not have to worry about putting the key in the correct way up.

Extra keys available with order please go to Mul-T-Lock Garrison key cutting service.

 

Can't find what you require? Call us on 01443 433888

35/35 Oval cylinder that can be master keyed or keyed alike with all other locks in the Garrison range (even the padlock on your shed, gates or garage). There is no need for a huge bunch of keys any longer. Beef up your security and increase your convenience at the same time!  If you wish to purchase cylinders in keyed alike form, so that one key fits all locks please go to our Mul-T-Lock Garrison Keyed Alike Products.

The Garrison cylinder uses a 7 pin tumbler locking mechanism,is torsion resistant, pick resistant & corrosion resistant.

Each individual differ is provided with a ''security key cutting card''. This card contains information to enable our dedicated to machinery to cut each key as an original, rather than making a copy from a possibly very worn key. It is very difficult to copy a Garrison key without this card and the dedicated machinery.

As Garrison is a 7 pin system it allows for over 800,000 different keys. Far greater than the 20,000 offered by other high quality standard cylinders.

The dimpled key is double sided so you do not have to worry about putting the key in the correct way up.

These cylinders are available in a thumbturn version so that you do not need a key to open the door from the inside. When ordering a cylinder with a thumbturn take note which side the thumbturn is on so that you order correctly.E.g. a cylinder meassuring 40/60 with the thumbturn on the 40 side would be ordered as a 40T/60.
Supplied with 2 keys.

Extra Keys Available with order please go to Mul-T-Lock Garrison Key Cutting Service. 

Useful Information - How to Measure a Euro Cylinder

 
Can't find what you require? Call us on 01443 433888

Single
Finish: Nickel Plate with Brass Plug
Mechanism:  7 Pin
Keys Supplies: 2 with security key cutting card
Can be keyed alike:  Yes 
Can be master keyed:  Yes
Features
Suitable with Adams Rite and most other mortice type metal door locks.

Face Diameter	34
Rose Diameter	40
Body Length	29
Overall length including cam	33
Body Diameter	29

Can Be keyed alike or master keyed with other locks in the Garrison range (even the lock on your shed, gates or garage).There is no need for a huge bunch of keys any longer. Beef up your security and increase your convenience at the same time! If you wish to purchase cylinders in keyed alike form, so that one key fits all locks please go to our Mul-T-Lock Garrison Keyed Alike Products.
The Garrison cylinder uses a 7 pin tumbler locking mechanism,is torsion resistant, pick resistant & corrosion resistant.

Each individual differ is provided with a "security key cutting card". This card contains information to enable our dedicated to machinery to cut each key as an original, rather than making a copy from a possibly very worn key. It is very difficult to copy a Garrison key without this card and the dedicated machinery.

As Garrison is a 7 pin system it allows for over 800,000 different keys. Far greater than the 20,000 offered by other high quality standard cylinders.

The dimpled key is double sided so you do not have to worry about putting the key in the correct way up.

Extra Keys Available with order please go to Mul-T-Lock Garrison Key Cutting Service.

Can't find what you require? Call us on 01443 433888

This range of padlocks are available in three sizes, 8mm, 10mm & 12mm diameter Boron hardened shackle. Supplied with 2 keys.

Features
Exceeds CEN Level 3
Ball Bearing locking mechanism
Anti corrosive in all weather conditions
Brass body with satin chrome coating
Key Retaining

Can Be keyed alike or master keyed with other locks in the Garrison range (even the padlock on your house, gates or garage).There is no need for a huge bunch of keys any longer. Beef up your security and increase your convenience at the same time!If you wish to purchase locks in keyed alike form, so that one key fits all locks please go to our Mul-T-Lock Garrison Keyed Alike Products.

The Garrison cylinder uses a 7 pin tumbler locking mechanism,is torsion resistant, pick resistant & corrosion resistant.
Each individual differ is provided with a ''security key cutting card''. This card contains information to enable our dedicated to machinery to cut each key as an original, rather than making a copy from a possibly very worn key. It is very difficult to copy a Garrison key without this card and the dedicated machinery.

As Garrison is a 7 pin system it allows for over 800,000 different keys. Far greater than the 20,000 offered by other high quality standard cylinders.

The dimpled key is double sided so you do not have to worry about putting the key in the correct way up.

Extra keys available with order please go to Mul-T-Lock Key cutting service.

 

Can't find what you require? Call us on 01443 433888

Compatible with all nightlatches and available in a Brass or Nickel finish. Supplied with 2 keys and security card to aid future additional key cutting.

Can be keyed alike or master keyed with other locks in the Garrison range (even the lock on your shed, gates or garage).There is no need fro a huge bunch of keys any longer. Beef up your security and increase your convevience at the same time!  If you wish to purchase cylinders in keyed alike form, so that one key fits all locks please go to our Mul-T-Lock Garrison Keyed Alike Products.

The Garrison cylinder uses a 7 pin tumbler locking mechanism,is torsion resistant, pick resistant & corrosion resistant.

Each individual differ is provided with a ''security key cutting card''. This card contains information to enable our dedicated to machinery to cut each key as an original, rather than making a copy from a possibly very worn key. It is very difficult to copy a Garrison key without this card and the dedicated machinery.

As Garrison is a 7 pin system it allows for over 800,000 different keys. Far greater than the 20,000 offered by other high quality standard cylinders.

The dimpled key is double sided so you do not have to worry about putting the key in the correct way up.

Extra keys available with order please go to Mul-T-Lock Key Cutting Service

Can't find what you require? Call us on 01443 433888

Pairs: Keyed Alike
Finish: Nickel Plate with Brass Plug
Mechanism:  7 Pin
Keys Supplies: 2 with security key cutting card
Keyed Alike:  In pairs 
Can be masterkeyed:  Yes

Features
Suitable with Adams Rite and most other mortice type metal door locks.

Face Diameter	34mm
Rose Diameter	40mm
Body Length	29mm
Overall length	33mm
Body Diameter:	29mm

Can Be keyed alike or master keyed with other locks in the Garrison range (even the lock on your shed, gates or garage).There is no need for a huge bunch of keys any longer. Beef up your security and increase your convenience at the same time! If you wish to purchase cylinders in keyed alike form, so that one key fits all locks please go to our Mul-T-Lock Garrison Keyed Alike Products.

The Garrison cylinder uses a 7 pin tumbler locking mechanism,is torsion resistant, pick resistant & corrosion resistant.

Each individual differ is provided with a "security key cutting card". This card contains information to enable our dedicated to machinery to cut each key as an original, rather than making a copy from a possibly very worn key. It is very difficult to copy a Garrison key without this card and the dedicated machinery.

As Garrison is a 7 pin system it allows for over 800,000 different keys. Far greater than the 20,000 offered by other high quality standard cylinders.

The dimpled key is double sided so you do not have to worry about putting the key in the correct way up.

Extra Keys Available with order please go to Mul-T-Lock Garrison Key Cutting Service.

Can't find what you require? Call us on 01443 433888

With break-ins from euro-cylinder attack on the increase, the Break Secure Cylinder is designed to  resist an aggressive form of attack that a conventional eurocylinder is unable to withstand. The Mul-T-Lock Break Secure Eurocylinder will remain operational even after being attacked. The key is still required to open the lock after it has been damaged. So even when it's broken it's still secure! It can be master keyed or keyed alike with all other locks in the Garrison range (even the padlock on your shed, gates or garage). There is no need for a huge bunch of keys any longer. Beef up your security and increase your convenience at the same time!  If you wish to purchase cylinders in keyed alike form, so that one key fits all locks please go to our Mul-T-Lock Garrison Keyed Alike Products.

The Garrison cylinder uses a 7 pin tumbler locking mechanism,is torsion resistant, pick resistant & corrosion resistant.

Each individual differ is provided with a ''security key cutting card''. This card contains information to enable our dedicated to machinery to cut each key as an original, rather than making a copy from a possibly very worn key. It is very difficult to copy a Garrison key without this card and the dedicated machinery.

As Garrison is a 7 pin system it allows for over 800,000 different keys. Far greater than the 20,000 offered by other high quality standard cylinders.

The dimpled key is double sided so you do not have to worry about putting the key in the correct way up.

These cylinders are also available in a thumbturn version so that you do not need a key to open the door from the inside. When ordering a cylinder with a thumbturn take note which side the thumbturn is on so that you order correctly.E.g. a cylinder meassuring 40/60 with the thumbturn on the 40 side would be ordered as a 40T/60.
Supplied with 2 keys.

Extra Keys Available with order please go to Mul-T-Lock Garrison Key Cutting Service. 

Useful Information - How to Measure a Euro Cylinder

 
Can't find what you require? Call us on 01443 433888