Crystal Vision Locks: Architectural Ironmongery
Max Door Width: 1200mm
Max Door Height: 2440mm
BS EN Operation: BS EN1125
Finish: Silver
Handed: Reversible
Features
Automatic top catch and easy clean floor socket as standard
The main body is fitted with an anti thrust device which prevents leverage of both top and bottom shoots from their sockets
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1100mm
Max Door Weight:- 80Kg
Strength Size:- EN2-6
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- Yes
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, to 2 Hours timer
4 Hours Metal
FEATURES
Spring strength adjustable by means of Allen Key.
Thinking Backcheck
When fitted in parallel arm application maximum door width 950mm.
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
233mm |
60mm |
42.5mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Max Door Width:- 1100mm
Max Door Weight:- 80Kg
Strength Size:- 4
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- No
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver or Polished Brass
Fire Tested:- Yes to 2 Hours
FEATURES
Concealed adjustment to prevent unauthorised adjustment to closer.
2004E Fire Tested to 2 Hours.
EN1154 Compliant.
10 Year Guarantee.
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
Dimensions
Length
Width
Depth
249mm
48mm
59mm
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Lever on Rose with concealed fixing.
Available in polished chrome finish.
Two Part Screw-on Rose.
Dimensions
Rose Diameter: 50mm
Rose Thickness: 10mm
Projection: 65mm
Lever Length: 126mm
Can't find what you require? Call us on 01443 433888
Max Door Width: 1220mm
Max Door Height: 2440mm
BS EN Operation: BS EN1125
Finish: Silver
Handed: Reversible
Features
Set contains Exidor 296 panic latch for first opening leaf
Exidor 294 single panic bolt for second opening leaf and a 300 box to secure the panic latch
Can't find what you require? Call us on 01443 433888
Stylish, well designed post box made of high quality plastic
Integrated compartment for news papers
Large volume
Lock supplied with 2 keys
Available in silver or white finish
Dimensions: 320H x 420W x 155H (mm)
Can't find what you require? Call us on 01443 433888
Finish: Polished Brass or Chrome Plate
Backplate Size: 170mm x 45mm
Fixing: Screw
Spindle Size: 8mm
Can't find what you require? Call us on 01443 433888
Max Door Width : 1400mm
Max door weight : 120kg
Strength size : 1-6
Adjustable closing action : yes
Delayed latch action : yes
Backcheck : yes
Applications : Fig 1,61 & 66 See Below
Handed : Reversable
Finish : Silver, Polished Brass or Satin Stainless Steel
Fire Tested : Yes to 2 hours
FEATURES
Supplied with full cover - PB & SSS
Completely adjustable
Available in most finishes
10 year guarantee
BS EN 1154 compliant
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
300mm |
56mm |
72mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.
What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Max door weight: 50Kg
Applications: Concealed
Finish: Polished Brass
Fire tested: Yes, incorporated in doors that weretested to BS476 Part22, 1987, does not affect latched 1/2 hour and 1 hour fire door integrity.
Features
Concealed in the door
Only visible parts are anchor plate and chain
Tested to withstand 500,000 open and closing cycles
For use on vertical doors
Dimensions
Tube length: 142mm
Diameter: 22mm
Plate height: 51mm
Plate width: 25mm
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Can't find what you require? Call us on 01443 433888
Max Door Width: 1300mm
Max Door Height: Not applicable
BS EN Operation: EN179
Finish: Silver
Handed: Supplied left or right but reversible on site
Features
Pad operated rim catch
Suitable for use on single doors and for the first opening leaf of double rebated door applications
Can be used with a rim cylinder fitted yo the outside of the door
Suitable left or right hand, but reversible on site
Includes fixing pack for timber and metal door sets
Can't find what you require? Call us on 01443 433888
Max Door Width:- 950mm
Max Door Weight:- 60Kg
Strength Size:- 3
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- No
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver or Polished Brass
Fire Tested:- Yes to 1 Hour
FEATURES
Concealed adjustment to prevent unauthorised adjustment to closer.
2003E Fire Tested to 1 Hour.
EN1154 Compliant.
Certified approved CF111
10 Year Guarantee.
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
Dimentions
|
Length |
Width |
Depth |
|
249mm |
48mm |
59mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Lever on Rose with concealed fixing
Available in polished chrome finish.
Press-on rose.
Dimensions
Rose Diameter: 52mm
Rose Thickness: 10mm
Projection: 62mm
Lever Length 109mm
Can't find what you require? Call us on 01443 433888
Max Door Weight:- 75Kg
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- N/A
Backcheck:- N/A
Applications:- Concealed
Finish:- Polished Brass
Fire Tested:- Yes
Incorporated in doors that were tested to BS476 part 22 1987, does not affect latched 1/2 hour and 1 hour fire door integrity.
FEATURES
Concealed in the door.
The only parts visible are the anchor plate and the chain.
Smooth controlled mechanism with latching action.
Tested to withstand 500,000 open and close cycles
Suitable for use on light or medium weight internal doors, except those fitted with rising butt, parliament or projecting hinges.
Dimensions
Tube Length - 168mm
Diameter - 60mm
Plate Height - 121mm
Plate Width - 25mm
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Can't find what you require? Call us on 01443 433888
Designed for emergency single exit doors
Breaking the glass results in the bolt sliding back automatically and oening the door
Finish: White
Dimensions: H193 x W50 x D48mm
Non-handed
Related Products: Padlocks
Can't find what you require? Call us on 01443 433888
Union U803 Panic Latch
Max Door Width: 1400mm
Max Door Height: Not applicable
BS EN Operation: BS EN1125
Finish: Silver or dark metallic grey
Handed: Reversible
Features
Can be operated from outside with outside access device
Can't find what you require? Call us on 01443 433888
Available in 100mm, 150mm & 200mm sizes
Galvanised finish
For padlocks to complement these products please visit our padlock section
Can't find what you require? Call us on 01443 433888
Lever on Rose with concealed fixing.
Available in satin chrome finish.
Two Part Screw-on Rose.
Dimensions
Rose Diameter: 50mm
Projection: 65mm
Lever Length: 120mm
Can't find what you require? Call us on 01443 433888
Available in polished brass
Short backplate is available
Dimensions
Backplate: 270 X 48mm
Lever length: 110mm
Projection: 66mm
Plate thickness: 10mm
Short backplate version: 180 X 48mm
Can't find what you require? Call us on 01443 433888
Finish: Polished Brass
Backplate size: 110mm x 45mm (Lever Latch)
149mm x 45mm (all Others)
Fixing: Screw
Spindle Size: 8mm
Can't find what you require? Call us on 01443 433888
Max Door Width: 1300mm
Max Door Height: 2500mm
BS EN Operation: EN1125
Finish: Silver
Handed: Left or right, reversible on site
Features
Set contains Briton 378Erim panic latch for first opening leaf
Briton 376E single panic bolt for second opening leaf
Double door strike to secure rim panic latch
Supplied left or right handed, but can be reversed on site
Can't find what you require? Call us on 01443 433888
Size: H305 x W228 x D127mm
Finish: Chrome, Electro Brass or White
Can't find what you require? Call us on 01443 433888
Measurements: H136 x W60 x D29mm
Finish: Dark metallic grey
Handed: Non-handed
Features
Oval knob handle for easy operation
Suitable for use with U801,U802,U803 & U804 panic hardware
Concealed fixing
Euro cylinder
Can't find what you require? Call us on 01443 433888
Max Door Width: 1300mm
Max Door Height: Not applicable
BS EN Operation: EN1125
Finish: Silver
Handed: Supplied right handed but reversible on site
Features
Additional security without affecting safety
Panic operator supplied with mortice night latch
Supplied right handed but can be reversed on site
Anti-thrust device and dual profile lockcase accepts both euro and oval profile cylinders (cylinder not supplied)
Can't find what you require? Call us on 01443 433888
Max Door Width: 1300mm
Max Door Height: Not applicable
BS EN Operation: EN1125
Finish: Silver
Handed: Supplied left or right but reversible on site
Features
For use on single doors or first opening leaf of a pair of doors
With rebated meeting styles, where a vertical bolt is fitted to the other leaf
Supplied left or right handed, but can be reversed on site
Double door strike is required for double door applications
Can't find what you require? Call us on 01443 433888
Max Door Width: 1300mm
Max Door Height: 2500mm
BS EN Operation: BS EN1125
Finish: Silver
Handed: Left or right
Features
Set contains Asec panic latch for first opening leaf
Asec single panic bolt for second opening leaf
Double door strike to secure the panic latch
Supplied left or right hand but can be reversed on site
Can't find what you require? Call us on 01443 433888
Size: H355 x W255 x D153mm
Finish: Chrome, Electro Brass or White
Can't find what you require? Call us on 01443 433888
Measurements: H175 x W55 x D87mm
Finish: Silver
Handed: Reversible
Features
Knob with improved grip in wet conditions
Supplied complete with euro cylinder
Suitable for doors between 40mm & 70mm thick
Supplied with fixings suitable for timber and metal doors
Can't find what you require? Call us on 01443 433888
Manufactured from cast aluminium, Redlam panic bolts offer an economical answer of providing reliable security for internal emergency exits.
Designed for emergency exit single doors. Breaking the ceramic tube results in the bolt sliding back automatically and unlocking the door.
The ceramic tube is designed to produce no sharp edges when smashed.
Replacement tubes are available.
Can't find what you require? Call us on 01443 433888
Type: Double phosphor bronze washered.
Finish: Polished Brass or Chrome Plate.
Size: 102mm x 67mm x 4mm
75mm x 50mm x 2.5mm
Can't find what you require? Call us on 01443 433888
Max Door Width: Not applicable
Max Door Height: Not applicable
BS EN Operation: EN179
Finish: Silver
Handed: Reversible
Features
Pad operated rim latch
Suitable for use on single doors and for the first opening leaf of double rebated door applications
Can be used with a rim cylinder fitted the outside of the door
Can't find what you require? Call us on 01443 433888
Max Door Width: Not applicable
Max Door Height: Not applicable
BS EN Operation: EN179
Finish: Silver or dark mettalic grey
Handed: Reversible
Features
Push pad operation for single door.
Can't find what you require? Call us on 01443 433888
Manufactured from cast aluminium, Redlam panic bolts offer an economical answer of providing reliable security for internal emergency exits.
Designed for interconnecting emergency exit doors. Operates one side of the door by breaking the tube and on the other side by pushing the knob.
The ceramic tube is designed to produce no sharp edges when smashed.
Replacement tubes are available.
Can't find what you require? Call us on 01443 433888
For use in internal wooden doors
Available in brass or nickel plate finish
In 64mm or 79mm body sizes
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1100mm
Max Door Weight:- 80Kg
Strength Size:- EN 2-4
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- Yes
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, to 2 Hours timer
4 Hours Metal
FEATURES
When fitted in parallel arm application maximum door width 950mm.
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
232mm |
68mm |
45mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Max Door Width: 1300mm
Max Door Height: Not applicable
BS EN Operation: BS EN179
Finish: Silver
Handed: Left or right
Features
Pad operated rim latch
Suitable for use on single doors and the first opening leaf of double rebated door applications
Can be used with a rim cylinder fitted to the outside of the door
Supplied left or right hand, but can be reversed on site
Includes fixing pack for timber and metal door sets
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1250mm
Max Door Weight:- 100Kg
Strength Size:- 3 - 5
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- No
Applications:- Fig 1, Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver, Polished Brass or Satin Stainless Steel
Fire Tested:- Yes, to 2 hours
FEATURES
Supplied with full cover matching thoughout 3 different finishings
Range Available in most finishes
10 year Guarantee
BS EN 1154 Compliant
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
Dimensions
| Length | Width | Depth |
| 239mm | 56mm | 70mm |
Door Controls
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Finish: Polished Brass
Backplate Size: 118mm x 43mm (lever latch)
150mm x 43mm (all other)
Fixing: Screw
Spindle Size: 8mm
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1400mm
Max Door Weight:- 120Kg
Strength Size:- 2-6
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- Yes
Backcheck:- Yes
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, to 2 Hours timer
4 Hours Metal
FEATURES
Thinking backcheck.
When fitted in parallel arm application maximum door width 1200mm.
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
293mm |
60mm |
47.5mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Lever on Rose with concealed fixing.
Available in satin chrome finish.
Press-on Rose.
Dimensions
Rose Diameter: 52mm
Rose Thickness: 10mm
Projection: 69mm
Lever Length: 113mm
Can't find what you require? Call us on 01443 433888
Lever on Rose with concealed fixing.
Available in polished chrome finish.
With 2 Part Screw-on Rose.
Dimensions
Rose Diameter: 50mm
Projection: 65mm
Lever Length: 130mm
Can't find what you require? Call us on 01443 433888
Available in polished brass & florentine brass
Short backplate is available
Dimensions
Backplate: 270 X 48mm
Lever length: 108mm
Projection: 60mm
Plate thickness: 10mm
Short backplate version: 180 X 48mm
Can't find what you require? Call us on 01443 433888
Finish: Polished Brass or Chrome Plate
Backplate size: 112m x 47mm (lever latch short plate)
170mm x 47mm (all others)
Fixing: Screw
Spindle Size: 8mm
Can't find what you require? Call us on 01443 433888
Finish: Polished Brass
Back Plate size : 118mmx 43mm (lever latch)
150mm x 53 (all Others)
Fixing: Screw
Spindle Size: 8mm
Can't find what you require? Call us on 01443 433888
Lever on Rose with concealed fixing.
Available in polished chrome finish.
Two Part Screw-on Rose.
Dimensions
Rose Diameter: 50mm
Rose Thickness: 10mm
Projection: 69mm
Lever Length: 132.5mm
Can't find what you require? Call us on 01443 433888
Bolt Size: 62 x 40 x 12.5mm
indicator Size: 62 x 42 x 7mm
Finish: Satin Stainless Steel
Can't find what you require? Call us on 01443 433888
Lever on Rose with concealed fixing.
Available in satin chrome/polished chrome finish.
Two Part Screw-on Rose.
Dimensions
Rose Diameter: 50mm
Rose Thickness: 10mm
Projection: 60mm
Lever Length: 126mm
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1400mm
Max Door Weight:- 120Kg
Strength Size:- 2 - 6
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- Yes
Backcheck:- Yes
Applications:- Fig 1, Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, 2 hours
FEATURES
Concealed adjustment to prevent unautorised adjustment to closer
10 year Guarantee
BS EN 1154 Compliant
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
318mm |
74mm |
62mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Finish: Polished Brass Or Chrome Plate.
Backplate Size: 170mm x 41mm
Spindle Size: 8mm
Centres: 48mm
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1100mm
Max Door Weight:- 80Kg
Strength Size:- EN 4
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- No
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, to 2 Hours timer
4 Hours Metal
FEATURES
Multipoint hold open.
24V DC Operating Voltage
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
320mm |
60mm |
59mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard provides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are identified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Measurements: H175 x W55 x D81mm
Finish: Silver
Handed: Reversible
Features
Lever
Supplied loose to allow easy on site handing
Supplied complete with euro cylinder
Suitable for doors between 40mm & 70mm thick
Supplied with fixings suitable for timber and metal doors
Can't find what you require? Call us on 01443 433888
Max Door Width: 1220mm
Max Door Height: Not applicable
BS EN Operation: BS EN1125
Finish: Silver
Handed: Reversible
Features
For use on single doors or first opening leaf of a pair of doors with rebated meeting styles, where a vertical bolt is fitted to the other leaf
Can be operated by a rim cylinder fitted to the outside of the door
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1400mm
Max Door Weight:- 120Kg
Strength Size:- 2 - 6
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- Yes
Applications:- Fig 1, Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver or Brass
Fire Tested:- Yes, 2 hours
FEATURES
Concealed adjustment to prevent unautorised adjustment to closer
10 year Guarantee
BS EN 1154 Compliant
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
310mm |
55mm |
66mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Lever on Rose with concealed fixing.
Available in satin nickel/polished chrome finish.
Two Part Screw-on Rose.
Dimensions
Rose Diameter: 50mm
Rose Thickness: 10mm
Projection: 65mm
Lever Length: 130mm
Can't find what you require? Call us on 01443 433888
Max Door Width: 1300mm
Max Door Height: Not applicable
BS EN Operation: BS EN1125
Finish: Silver
Handed: Left or right
Features
For use on single doors of first opening leaf of a pair of doors with rebated meeting styles, where a vertical bolt is fitted to the other leaf (ASSIPB)
Supplied left or right handed but can be reversed on site
Double door strike is required to for double door applications
Can't find what you require? Call us on 01443 433888
Max Door Width:- 930mm
Max Door Weight:- 60Kg
Strength Size:- 3
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- No
Applications:- Fig 1 & Fig 61
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes
FEATURES
Single action electro - magnetically controlled closing device.
On site choise of ''Hold open'' or ''Free swing'' functions.
Ideal for use in areas used by the elderly or infirmed
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
305mm |
64mm |
92mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Lever on Rose with concealed fixing.
Available in satin chrome finish.
Two Part Screw-on Rose.
Dimensions
Rose Diameter: 50mm
Rose Thickness: 10mm
Projection: 56mm
Lever Length: 114
Can't find what you require? Call us on 01443 433888
Available in polished brass
Dimensions
Backplate: 270 X 48mm
Lever length: 110mm
Projection: 66mm
Plate thickness: 9mm
Can't find what you require? Call us on 01443 433888
Max Door Width: 1300mm
Max Door Height: 2500mm
BS EN Operation: EN1125
Finish: Silver
Handed: Reversible
Features
Anti-thrust device and automatic top catch to release bolt into secure position when door is closed
Self handing for use on single and double door applications
Can't find what you require? Call us on 01443 433888
The wedging open of fire doors is both dangerous and illegal. Dorgard is the legal,safe and cost effective answer.
Dorgard is a wireless solution for legally holding open fire doors in any position.
Features
Installs in under 5 minutes
Improves access for wheelchair users in line with the Disability Discrimination Act
Complies with BS EN 1155 and approved by the fire service
Automatically releases fire doors when the alarm sounds
Available in a variety of colours and finishes
Automatic night-time release facility
Dorgard is suitable for normal environments, e.g. offices, hotels and care homes that have an automatic fire detection system.
Can't find what you require? Call us on 01443 433888
Features
Standard Duty
Material: Mild steel
Finish: Black Jappanned or Galvanised
|
Size |
Overall Length |
Fixed Leaf Length |
Hasp Height |
Staple Width |
Staple Height |
Staple Hole Dia |
|
617/75 |
75 |
30 |
37 |
31 |
26 |
12 |
|
617/114 |
114 |
58 |
37 |
31 |
26 |
12 |
|
617/152 |
152 |
63 |
47 |
50 |
33 |
15 |
Can't find what you require? Call us on 01443 433888
Lever on Rose with concealed fixing.
Available in polished chrome finish.
Press-on Rose.
Dimensions
Rose Diameter: 52mm
Rose Thickness: 10mm
Projection: 67mm
Lever Length: 113mm
Can't find what you require? Call us on 01443 433888
Lever on Rose with concealed fixing.
Available in polished chrome finish.
Two Part Screw-on Rose.
Dimensions
Rose Diameter: 50mm
Projection: 65mm
Lever Length: 120mm
Can't find what you require? Call us on 01443 433888
Max Door Width: 14000mm
Max Door Height: 2440mm
BS EN Operation: BS EN1125
Finish: Silver
Handed: Reversible
Features
Suitable for use on double rebated outward opening doors
Can be operated from outside with outside access device
Self adjusting trip action device
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1100mm
Max Door Weight:- 80Kg
Strength Size:- 2 - 4
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- Yes
Applications:- Fig 30
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, 2 hours
FEATURES
Concealed adjustment to prevent unautorised adjustment to closer
10 year Guarantee
BS EN 1154 Compliant
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
Dimensions
| Length | Width | Depth |
| 310mm | 55mm | 66mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Dimensions 184mm x 41mm
Features
Solid hardened steel body resits cutting, sawing & hammering
Heavy Duty
Concealed fixing holes
Supplied complete with fixing screws
Can't find what you require? Call us on 01443 433888
Measurements: H175 x W55 x D81mm
Finish: Silver
Handed: Reversible
Features
Lever handle
Supplied loose to allow easy on site handing
Supplied for doors between 40 & 70mm thick
Fixing suitable for timber and metal doors
Can't find what you require? Call us on 01443 433888
Max Door Width:- 850mm
Max Door Weight:- 40Kg
Strength Size:- 2
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- No
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- N/A
FEATURES
Concealed adjustment to prevent unauthorised adjustment to closer.
EN1154 Compliant.
10 Year Guarantee.
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
Dimensions
|
Length |
Width |
Depth |
|
249mm |
48mm |
59mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Max Door Width:- 830mm
Max Door Weight:- 45Kg
Strength Size:- 3
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- No
Applications:- Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes
FEATURES
Single action electro - magnetically controlled closing device.
On site choise of ''Hold open'' or ''Free swing'' functions.
Ideal for use in areas used by the elderly or infirmed
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
305mm |
64mm |
92mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Max Door Width:- 1400mm
Max Door Weight:- 120Kg
Strength Size:- 2-6
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- Yes
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, to 2 Hours timer
4 Hours Metal
FEATURES
Thinking backcheck.
When fitted in parallel arm application maximum door width 1200mm.
Weather resistant.
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
293mm |
60mm |
47.5mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Max Door Width: 1300mm
Max Door Height: 2500mm
BS EN Operation: BS EN1125
Finish: Silver
Handed: Reversible
Features
Anti-thrust device and automatic top catch to release bolt into secure position when door is closed
Self handing for use on single and double door applications
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1400mm
Max Door Weight:- 120Kg
Strength Size:- 2 - 6
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- Yes
Backcheck:- Yes
Applications:- Fig 1, Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, 2 hours
FEATURES
Concealed adjustment to prevent unautorised adjustment to closer
10 year Guarantee
BS EN 1154 Compliant
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
310mm |
55mm |
66mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Size: H457 x W330 x D203mm
Finish: Chrome, Electro Brass or White
Can't find what you require? Call us on 01443 433888
Classic elegant design
Manufactured in galvanised steel
Powder coated finsh
Supplied complete with 2 keys
Available in white only
Dimensions: 345H x 410W x 205D (mm)
Can't find what you require? Call us on 01443 433888
Max door width :- 900mm
Max door weight:- 45Kg
Strength Size:- 3
Adjustable closing action:- Yes
Adjustable latch action:- Yes
Delayed action:- No
Backcheck:- No
Applications:- Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, to 1 hours
FEATURES
Tested to over 500,000 Cycles
Fire tested to BS476 pt. 22 to a 1hour standard
10Yr Guarantee manufactured to ISO9002
Applications
Fig 66:- Mounted on the push face of the door.
Dimensions
| Length | Width | Depth |
| 186mm | 67mm | 45mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.
What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Lever on Rose with concealed fixing.
Available in satin chrome finish.
Press-on Rose.
Dimensions
Rose Diameter: 52mm
Rose Thickness: 10mm
Projection: 68mm
Lever Length: 109mm
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1100mm
Max Door Weight:- 80Kg
Strength Size:- EN 3-4
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- No
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, to 2 Hours timer
4 Hours Metal
FEATURES
When fitted in parallel arm application maximum door width 950mm.
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
232mm |
68mm |
45mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Max door width :- 1100mm
Max door weight:- 80Kg
Strength Size:- 3-4
Adjustable closing action:- Yes
Adjustable latch action:- Yes
Delayed action:- No
Backcheck:- No
Applications:- Fig1, Fig61 & Fig 66
Handed:- Reversible
Finish:- Silver, Polished Brass or Satin Stainless Steel
Fire Tested:- Yes, to 2 hours
FEATURES
Supplied with full cover matching throughout
Range available in most finishes
10Yr Guarantee
BS EN 1154 compliant
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
Dimensions
| Length | Width | Depth |
| 190mm | 47mm | 61mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.
What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Max Door Width: 1400mm
Max Door Height: 2440mm
BS EN Operation: BS EN1125
Finish: Silver
Handed: Reversible
Features
Suitable for timber and metal doors
Can be operated from outside with outside access device
Self adjusting trip action bolt device
20mm top & bottom bolt throw
Can't find what you require? Call us on 01443 433888
Max Door Width:- 1100mm
Max Door Weight:- 80Kg
Strength Size:- EN 2-4
Adjustable Closing Action:- Yes
Adjustable Latch Action:- Yes
Delayed Action:- No
Backcheck:- No
Applications:- Fig 1 & Fig 61 & Fig 66
Handed:- Reversible
Finish:- Silver
Fire Tested:- Yes, to 2 Hours timer
FEATURES
Strength size adjustable by moving closer body or turning the arm power shoe.
Applications
Fig 1:- Mounted on pull side of door.
Fig 61:- Mounted on the transom of the push side of the door.
Fig 66:- Mounted on the push face of the door.
|
Length |
Width |
Depth |
|
220mm |
53.5mm |
45mm |
DOOR CONTROLS
A door closer is an important link in the control of fire and smoke and could also save lives. The closing device standard BS EN 1154: 1997 is the minimum requirement for any door control manufacturer. This standard porvides details on product types, classification of use cycle testing, corrosion resistance, performance requirements test methodology and product marking.What does BS EN 1154 Mean to you?
This standard classifies door closing devices using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standard performance requirements ie:483113
Digit 1:- Category of use
Identifies the angle of opening. Grade 4 means the closer will close the door from 180 degree aprox. Grade 3 closers will close the door from 105 degree.
Digit 2:- Test Cycles
Included in 500,000 cycle test. 8 is the only grade that can be obtained.
Digit 3:- Test door mass/size
Each number in this category identifies the closer size and its suitability for use on these doors. Adjustment strength closers are identified by showing both the minimum and maximum strength.
Digit 4:- Fire Behavior
Based on the results of the fire tests to BS476:part22. 1 is the grade given to the closers that are suitable for use on fire or smoke doors.
Digit 5:- Safety in use
A compulsory part of the standard, which ensures the closer, presents no hazard to the persons using the door.
Digit 6:- Corrosion resistance
Five grades are idintified form 0, which had no identified resistance to 4, which is very high resistance.
Grades are obtained after closers have been included in salt spray test and had their performances re-confirmed after the test.
Manufactured in shock resistant polystyrene
Finished in white
Mailslot on top and rear 220 x 25mm
Half turn security lock supplied with 2 keys
Perspex name plate
Drop down door
Wall fixing
Suitable for coastal weather
Can't find what you require? Call us on 01443 433888
Measurements: H175 x W55 x D87mm
Finish: Silver
Handed: Reversible
Features
Knob with improved grip in wet conditions
Supplied complete with euro cylinder
Suitable for doors between 40mm & 70mm thick
Can't find what you require? Call us on 01443 433888
Backplate Size:152mm x 38mm
Fixing: Screw
Spindle Size: 8mm
Finish: Satin Anodised Aluminium
Can't find what you require? Call us on 01443 433888